DESCRIPTION
The 150 Hob re-sharpening machine is ideally designed for sharpening of small fine pitch hobs and the small footprint is ideal for the customers tool room.
FEATURES
- For automatic operation, setup data are input from the operation screen
- Allows entering rough and finish grinding data as well as table stroke, ensuring highly efficient and accurate grinding and reduced processing time
- Equipped with a tailstock to produce excellent lead accuracy
- Flute indexing and table feeding are controlled with Servo motors to eliminate the need for change gears
| Hob diameter, maximum with special arbor |
80 mm |
| Hob diameter, maximum with standard arbor |
40 mm |
| Hob length, maximum with standard arbor |
40 mm |
| Number of Flute |
2-28 |
| Table Stroke |
170mm |
| Grinding spindle drive motor |
0.4 kW |
| Grinding Wheel speed range |
4,500 1/min |
| CBN Grinding Wheel diameter |
125 mm |
| Grinding Wheel Diameter |
90-140 mm |
| Arbor Interface |
NT# 125 |
| Total connected load, approximate |
2.1 kVA |
| Type | Hob Sharpening |
|---|
| Model | GN150 |
|---|
| Associated Documents | https://machinetoolbuilders.com/wp-content/uploads/GN150_Specs_2020-MTB.pdf |
|---|
