SMG SH210 Gear Hobbing Machine
SMG SH210 Gear Hobbing Machine
Newest competitively priced 210-350mm High Performance Gear Hobber from SMG out of South Korea. Fanuc 0i-MF or Siemens 840 CNC Torque motor table design Motorized hob head Conversational Programming Optional Ring Loader and Magazine available Robot load interface available Skiving/Auto Stock division Option available Wet or Dry cutting standard Hob presetting station is standard
Newest competitively priced 210-350mm High Performance Gear Hobber from SMG out of South Korea.
- Fanuc 0i-MF or Siemens 840 CNC
- Torque motor table design
- Motorized hob head
- Conversational Programming
- Optional Ring Loader and Magazine available
- Robot load interface available
- Skiving/Auto Stock division Option available
- Wet or Dry cutting standard
- Hob presetting station is standard
| Machine Capacity | ||||
| Maximum Work Piece Diameter with Loader | 210 | mm | 8.3 | Inch |
| Maximum Work Piece Diameter without Loader | 350 | mm | 13.8 | Inch |
| Maximum Module | 6 | Module | 4.2 | DP |
| Maximum Table Speed | 300 | RPM | ||
| Table Diameter | 240 | mm | 9.4 | Inch |
| Hob Head | ||||
| Maximum Hob Diameter | 180 | mm | 7.1 | Inch |
| Maximum Hob Length | 220 | mm | 8.7 | Inch |
| Maximum Hob RPM | 2000 | RPM | ||
| Maximum Hob RPM (Optional) | 1000 | RPM | ||
| Maximum Hob RPM (Optional) | 1500 | RPM | ||
| Maximum Hob Travel (Y Axis) | 200 | mm | 7.9 | Inch |
| Hob Swivel Angle | ±45 | Degrees | ||
| Hob Arbor Taper | BT 40 | Taper | ||
| Hob Spindle Power | 12 | kW | 16.1 | HP |
| Working Ranges | ||||
| X-Axis | ||||
| Radial Plus limit | 285 | mm | 11.2 | Inch |
| Radial Minus limit | 15 | mm | 0.6 | Inch |
| Total Radial Travel | 270 | mm | 10.6 | Inch |
| Z-Axis | ||||
| Axial Plus limit | 570 | mm | 22.4 | Inch |
| Axial Minus limit | 200 | mm | 7.9 | Inch |
| Axial Travel | 370 | mm | 14.6 | Inch |
| Axial Plus limit (Optional) | 800 | mm | 31.5 | Inch |
| Axial Minus limit (Optional) | 200 | mm | 7.9 | Inch |
| Axial Travel (Optional) | 600 | mm | 23.6 | Inch |
| Tailstock | ||||
| Tailstock Plus limit | 755 | mm | 29.7 | Inch |
| Tailstock Minus limit | 355 | mm | 14.0 | Inch |
| Tailstock Travel | 400 | mm | 15.7 | Inch |
| Speeds | ||||
| Radial (X) | 12 | m/min | 472.4 | inch/min |
| Axial (Z) | 12 | m/min | 472.4 | inch/min |
| Tangential (Y) | 5 | m/min | 196.9 | inch/min |
| Misc. Specs | ||||
| Number of axes | 6 | X,Y,Z,A,B,C | ||
| CNC | Fanuc 0i-MF or Siemens 840 | |||
| Length | 2741 | mm | 107.9 | Inch |
| Width | 3238 | mm | 127.5 | Inch |
| Height | 2990 | mm | 117.7 | Inch |
| Weight | 9500 | kg | 20,944 | lbs. |
| Voltage | 230 | VAC | 3 | Phase |
| Frequency | 50/60 | Hz | ||
| Type | Gear Hobber |
|---|---|
| Model | SH210 |
| Axis | 6 |
| Max Diameter Gear | 350mm without loader, 210mm with loader |
| Max Diameter Pitch | 4.2 |
| Horizontal/Vertical | Vertical |
