Liebherr LC502 CNC Gear Hobber
Have one to sell?
ConditionUsed
1 available
IN STOCK, UPGRADE COMPLETED, IN THE COMMISSIONING STAGE, STILL MODIFIABLE TO MEET YOUR REQUIREMENTS
This LC-502 hobber was treated to a light duty lifetime of making mostly plastic, aluminum and bronze fine pitch gears. It is mechanically in like new condition. We installed a new Fanuc 0iM-F Plus CNC and all new Fanuc HVi Alpha servos and spindle drive. It comes equipped with a special coolant/ filtering system to capture the non ferrous particles as well as ferrous materials. It has 4 smaller diameter hob arbors 1x 22mm, 1x 27mm and 2x 1.25" It also has a servo controlled tailstock up/down function and power clamping.
This machine is being offered with a full recontrol using a Fanuc 0i-MF Plus and in a fully re-certified condition. All re-certified machines are fully cleaned. All moving slides, spindles and parts handling systems are inspected for problems. Any gibs or adjustable backlash systems are adjusted to the best possible settings. All hydraulic, coolant, lubrication and pneumatic systems are checked for proper functionality and leaks. All filters are replaced. All worn hoses, broken cables, connectors, buttons, lamps and wires are replaced. All guarding is installed and checked. All machine cycles are tested. Parts are cut to verify the machine capability. Charts from the test cutting are documented for your viewing.
MECHANICAL SPECIFICATIONS INCH METRIC
-----------------------------------------------------------------
Number of CNC controlled axes 6
Number of CNC controlled spindles 1
Pitch rating 2.5 DP 14 Mod
Maximum workpiece diameter 19.685" 500 mm
Maximum axial travel 15.748" 400 mm
Worktable diameter 15.748" 400 mm
Table bore diameter 5.906" 150 mm
Table bore depth 15.748" 400 mm
Maximum radial center distance 13.386" 340 mm
Minimum radial center distance 1.575" 40 mm
Maximum hob diameter 6.693" 170 mm
Maximum hob length 9.055" 230 mm
Maximum hob shift travel 7.874" 200 mm
Maximum swivel angle -50 deg 50 deg
Hob speed range (Infinitely Variable) 72 to 720 RPM
Hob Spindle Power 41 HP 30.6 kW
Rapid traverse radial 118.110 in/min 3000 mm/min
Rapid traverse axial 78.740 in/min 2000 mm/min
Rapid traverse tangential 39.370 in/min 1000 mm/min
Machine Weight 21605 lbs 9800 kg
Plant power 480 VAC 60 Hz
Total connected load 78 KVA
Length 150.394" 3820 mm
Width 106.299" 2700 mm
Height 98.425" 2500 mm
CONTROLS
-----------------------------------------------------------------
Fanuc 0iM-F Plus with all new electrical cabinet
Fanuc Alpha HVi Digital drives
New Heidenhain Feedback Systems
FEATURES
-----------------------------------------------------------------
Servo Tailstock with spring preload pressure
Adjustable Height Tailstock Arm
Power clamping with pressure adjustment
Quick Release Hob Arbor System
BASE SOFTWARE
-----------------------------------------------------------------
Conversational based
Two passes (same or alternating directions)
Inch / Metric switchable
Incremental shifting by part count
Crowning (with center offset)
Taper compensation
Axial or radial/axial cycles
Programmable dwell
| Liebherr LC502 Hob Arbor (Optional) - 1.25" - $ 9,800.00 ea. |
| Liebherr LC502 Hob Arbor (Optional) - 1.5" - $ 10,100.00 ea. |
| Liebherr LC502 Hob Arbor (Optional) - 2.0" - $ 10,200.00 ea. |
MACHINE INCLUDES:
Multiple hob arbors of various sizes
2x 31.75mm (1.25″) Hob Arbor
1x 22mm (.866″) Hob Arbor
1x 27mm (1.0645″) Hob Arbor
PLEASE SEE ADDITIONAL INCH-SIZED HOB ARBORS (OPTIONAL) UNDER ACCESSORY SECTION.
Separate Coolant Tank for Ferrous and non-Ferrous materials
Chip Conveyor
Operation Manuals
Programming Manuals
Maintenance Documentation
MTB Recertification Program
Hob head will be checked for problems
Work table drive system checked for problems
Hydraulic system drained and cleaned
All filters changed
Machine will be thoroughly cleaned
All cycles will be tested and verified as fully functional
All worn hoses replaced
All broken electrical wires and cables will be repaired
All defective controls will be replaced or repaired
All features will be tested and verified as fully functional
Coolant system checked for problems
Coolant tank and chip collection system cleaned
All axes checked for accuracy and repeatability
All axes will be re-calibrated for home positions
Machine geometry checked and recorded
Tuning of all axes servos will be verified and adjusted
Sample parts will be cut if requested
We use cookies to improve your experience. Privacy Policy.