2002 LIEBHERR LC 682 Recontrol & Recertification Program
Have one to sell?
ConditionUsed
1 available
This Liebherr LC 682 is a heavy-duty CNC hobbing machine built for gears up to 26.8" (680 mm) in diameter and as coarse as 2.1 DP (12 module). A 32 hp (24 kW) hob head running to 750 rpm, 23.6" (600 mm) of axial travel and an NC outboard support with matching 23.6" travel give it the rigidity and reach for large spur and helical gears, splines and shaft-type work. The machine was originally configured for the North American market at 460 V / 60 Hz.
The machine will go through a full Machine Tool Builders Recontrol and Recertification program. The recontrol replaces the original electronics with a new Fanuc 0iF Plus CNC in a complete new electrical cabinet, new servo motor and feedback cabling, new feedback systems on every axis, and MTB's own conversational hobbing software with inch or metric programming. Before the new control is ever energized, MTB recertifies the machine mechanically: every function is checked, and anything not operating to specification is repaired or replaced. The result is a modern control on a machine known to be mechanically sound, not someone else's unresolved problems hidden in typical used machine offerings.
The machine is equipped with a ringloader, which MTB will configure to the customer's workpiece and handling requirements, or disable for manual loading if preferred. No workpiece conveyor or part stocker is included. Because the program is still ahead of us, there is room to tailor the machine to your application, including workholding and operator training. Delivery is 4 to 5 months from time of customer order, pending backlog at time of order. Contact Machine Tool Builders to discuss your workpieces and timing.
LIEBHERR LC 682 CNC HOBBING MACHINE, Serial #2008 - Recontrol & Recertification Program By MTB:
GENERAL SPECIFICATIONS Representative of Type:
Specification Imperial Metric
------------------------------------------------------------------------------
GENERAL:
Max. workpiece diameter 26.8 in 680 mm
Max. table speed 40 rpm 40 rpm
Center distance (hob to table) 2.0 - 19.7 in 50 - 500 mm
Approx. weight (varies with equipment) 33,070 lb 15,000 kg
Ambient operating temperature 59 - 100 °F 15 - 38 °C
COLUMN & HOB HEAD:
Max. axial travel 23.6 in 600 mm
Hob head swivel angle ±45° ±45°
Hob head drive power 32 hp 24 kW
Max. diametral pitch / module approx. 2.1 DP 12 module
Max. hob speed 750 rpm 750 rpm
Max. hob diameter 8.3 in 210 mm
Max. hob length 9.8 in 250 mm
Max. hob shift travel 8.7 in 220 mm
Max. hob shift speed 118 ipm 3,000 mm/min
OUTBOARD SUPPORT (GS 03 NC-600):
Max. outboard support travel 23.6 in 600 mm
Max. rapid traverse speed 394 ipm 10,000 mm/min
ELECTRICAL:
Main power 460 V / 60 Hz, 3-phase
Voltage / frequency tolerance ±10% / ±2%
Control voltage (PLC / CNC) 24 V DC
HYDRAULICS, LUBRICATION & COOLING:
Lubrication unit 3.1 (CLP HC 68 gear oil) 19.8 gal 75 L
Hydraulic unit 3.2 (HLP 46 hydraulic oil) 39.6 gal 150 L
Oil chiller (slide-in, CFC-free) 20,500 BTU/hr 6 kW
COOLANT SYSTEM (CUTTING OIL):
Coolant volume in machine bed approx. 211 gal approx. 800 L
Max. flow at nozzle 31.7 gpm 120 L/min
This Liebherr LC 682 is a heavy-duty CNC hobbing machine built for gears up to 26.8" (680 mm) in diameter and as coarse as 2.1 DP (12 module). A 32 hp (24 kW) hob head running to 750 rpm, 23.6" (600 mm) of axial travel and an NC outboard support with matching 23.6" travel give it the rigidity and reach for large spur and helical gears, splines and shaft-type work. The machine was originally configured for the North American market at 460 V / 60 Hz.
The machine will go through a full Machine Tool Builders Recontrol and Recertification program. The recontrol replaces the original electronics with a new Fanuc 0iF Plus CNC in a complete new electrical cabinet, new servo motor and feedback cabling, new feedback systems on every axis, and MTB's own conversational hobbing software with inch or metric programming. Before the new control is ever energized, MTB recertifies the machine mechanically: every function is checked, and anything not operating to specification is repaired or replaced. The result is a modern control on a machine known to be mechanically sound, not someone else's unresolved problems hidden in typical used machine offerings.
The machine is equipped with a ringloader, which MTB will configure to the customer's workpiece and handling requirements, or disable for manual loading if preferred. No workpiece conveyor or part stocker is included. Because the program is still ahead of us, there is room to tailor the machine to your application, including workholding and operator training. Delivery is 4 to 5 months from time of customer order, pending backlog at time of order. Contact Machine Tool Builders to discuss your workpieces and timing.
Metric
| Max Dia. Gear | 680 mm |
| Max Diametral Pitch | 2.1 |
| Horz/Vert | Vert |
| Axis | 6 |
| Length of Travel | 1,000 mm |
| Control | CNC (Fanuc 0iF+ CNC) |
| Dimensions | 162.7" L × 119.9" W × 132.7" H (4,133 × 3,045 × 3,370 mm) |
| Weight | 47000 lbs / 21,400 kg |
LIEBHERR LC 682 CNC HOBBING MACHINE, Serial #2008 - Recontrol & Recertification Program By MTB:
GENERAL SPECIFICATIONS Representative of Type:
Specification Imperial Metric
------------------------------------------------------------------------------
GENERAL:
Max. workpiece diameter 26.8 in 680 mm
Max. table speed 40 rpm 40 rpm
Center distance (hob to table) 2.0 - 19.7 in 50 - 500 mm
Approx. weight (varies with equipment) 33,070 lb 15,000 kg
Ambient operating temperature 59 - 100 °F 15 - 38 °C
COLUMN & HOB HEAD:
Max. axial travel 23.6 in 600 mm
Hob head swivel angle ±45° ±45°
Hob head drive power 32 hp 24 kW
Max. diametral pitch / module approx. 2.1 DP 12 module
Max. hob speed 750 rpm 750 rpm
Max. hob diameter 8.3 in 210 mm
Max. hob length 9.8 in 250 mm
Max. hob shift travel 8.7 in 220 mm
Max. hob shift speed 118 ipm 3,000 mm/min
OUTBOARD SUPPORT (GS 03 NC-600):
Max. outboard support travel 23.6 in 600 mm
Max. rapid traverse speed 394 ipm 10,000 mm/min
ELECTRICAL:
Main power 460 V / 60 Hz, 3-phase
Voltage / frequency tolerance ±10% / ±2%
Control voltage (PLC / CNC) 24 V DC
HYDRAULICS, LUBRICATION & COOLING:
Lubrication unit 3.1 (CLP HC 68 gear oil) 19.8 gal 75 L
Hydraulic unit 3.2 (HLP 46 hydraulic oil) 39.6 gal 150 L
Oil chiller (slide-in, CFC-free) 20,500 BTU/hr 6 kW
COOLANT SYSTEM (CUTTING OIL):
Coolant volume in machine bed approx. 211 gal approx. 800 L
Max. flow at nozzle 31.7 gpm 120 L/min
We use cookies to improve your experience. Privacy Policy.