Fellows Pfauter P630 CNC Conversion

Model
Manufacturer Fellows Pfauter
Model P630
Serial Number ????
Year of manufacture ????

Mechanical Specifications
Number of CNC controlled axes 4 X,Y,Z,C
Number of Optional CNC controlled axes 1 A
Number of CNC controlled spindles 1

Pitch rating               2.54 DP 10 Mod
Maximum workpiece diameter 24.803 in 630 mm
Maximum axial travel 16.732 in 425 mm
Worktable diameter 21.654 in 550 mm
Index worm diameter 21.654 in 550 mm
Table bore diameter 4.921 in 125 mm

Maximum radial center distance 1.969 in 50 mm
Maximum radial center distance 16.732 in 425 mm
Minimum axial height from table top 5.709 in 145 mm
Maximum axial height from table top 22.441 in 570 mm

Maximum hob diameter 7.559 in 192 mm
Maximum hob length 8.465 in 215 mm
Maximum hob shift travel 7.874 in 200 mm

Minimum number of teeth 6
Maximum swivel angle -45 deg +45 deg
Hob speed range (Infinitely Variable) 62 to 390 RPM
Taper in hob spindle Morse #5

Rapid traverse radial 78.740 in 2000.000 mm/rev
Rapid traverse axial 78.740 in 2000.000 mm/rev

Length 235.433 in 5980 mm
Width 114.764 in 2915 mm
Height 135.039 in 3430 mm

Machine Weight 18078 lbs 8200 kg
Plant power 460 VAC 60 Hz

Features
Swing Away Tailstock with pressure adjustment
Morse #5 taper for hob spindle
Wrap Around Guarding no roof

Controls
Fanuc 0iM-F Plus CNC
Fanuc Alpha HVi Drives and Motors

Base Software
Three passes (same or alternating directions)
Hobbing of four sequential gears in one cycle
Inch / Metric switchable
Incremental shifting by part count
Crowning with high point offset capability
Taper compensation
Axial or radial/axial cycles
Radial only cycle
Programmable dwell
Automatic or manual overtravel and approach calculations
Simple single indexing cycle
Tool offsets for quick size changes
Workpiece counter
Multiple program storage and retrieval
Shifting with table compensation
Auxiliary function selection (tailstock/clamping seq.)
Automatic or manual hob swivel angle calculation

Machine Includes

• Integral base coolant tank
• Integral Chip Conveyor
• One 1.25″ hob arbor and nut
• Two copies of the operations manuals
• Two copies of the maintenance documentation
• 1 Year warranty on machine and controls