| Model |
| Manufacturer |
Pfauter |
| Model |
PE-150 |
| Serial Number |
27308, 27383, 26697 |
| Year of manufacture |
TBD |
|
|
|
|
|
| Description |
| These machines are being offered in re-controlled and re-certified condition. We can also offer them with a full rebuild. All re-certified machines are fully cleaned. All moving slides, spindles and parts handling systems are inspected for problems. Any gibs or adjustable backlash systems are adjusted to the best possible settings. All hydraulic, coolant, lubrication and pneumatic systems are checked for proper functionality and leaks. All filters are replaced. All worn hoses, broken cables, connectors, buttons, lamps and wires are replaced. All guarding is installed and checked. All machine cycles are tested. Parts are cut to verify the machine capability. Charts from the test cutting are documented for your viewing. |
|
|
|
|
|
| Mechanical Specifications |
| Number of CNC controlled axes |
5 |
|
|
|
| Number of CNC controlled spindles |
1 |
|
|
|
| Pitch rating |
5.08 |
DP |
5 |
Mod |
| Maximum workpiece diameter |
5.906 |
in |
150 |
mm |
| Maximum axial travel |
7.874 |
in |
200 |
mm |
| Worktable diameter |
5.906 |
in |
150 |
mm |
|
|
|
|
|
| Maximum radial center distance |
6.299 |
in |
160 |
mm |
| Minimum radial center distance |
0.394 |
in |
10 |
mm |
|
|
|
|
|
| Worktable Starts |
4 |
|
|
|
| Maximum Worktable RPM |
150 |
RPM |
|
|
|
|
|
|
|
| Maximum hob diameter |
5.118 |
in |
130 |
mm |
| Maximum hob length |
8.661 |
in |
220 |
mm |
| Maximum hob shift travel |
6.693 |
in |
170 |
mm |
|
|
|
|
|
| Maximum swivel angle |
-30 |
deg |
45 |
deg |
| Hob speed range (Infinitely Variable) |
500 |
to |
600 |
RPM |
| Hob Spindle Power |
20.1 |
HP |
15 |
kW |
|
|
|
|
|
| Rapid traverse radial |
118.110 |
in/min |
3000 |
mm/min |
| Rapid traverse axial |
118.110 |
in/min |
3000 |
mm/min |
| Rapid traverse tangential |
118.110 |
in/min |
3000 |
mm/min |
|
|
|
|
|
| Machine Weight |
17857 |
lbs |
8100 |
kg |
| Plant power |
460 |
VAC |
60 |
Hz |
|
|
|
|
|
| Features |
| Tailstock with pressure adjustment |
| Power Clamping |
|
|
|
|
|
|
|
|
|
| Controls |
| Fanuc OiM-F with Fanuc Alpha HVi digital drives and motors |
|
| Base Software |
| Two passes (same or alternating directions) |
| Hobbing of four sequential gears in one cycle |
| Inch / Metric switchable |
| Incremental shifting by part count |
| Crowning with high point offset capability |
| Taper compensation |
| Axial or radial/axial cycles |
| Radial only cycle |
| Programmable dwell |
| Automatic overtravel and approach calculations |
| Tool offsets for quick size changes |
| Multiple program storage and retrieval |
| Automatic or manual hob swivel angle calculation |
|
|
|
|
|
| Optional Software |
| Custom cycles available upon request |
|
|
|
|
|
| Machine Includes |
| Integral Coolant Tank |
| Chip Conveyor |
| One set of leveling wedges |
| One 1.25″ hob arbor and nut |
| Two copies of the operations manuals |
| Two copies of the maintenance documentation |
| 30 Day return warranty on the machine |
|
|
|
|
|
| MTB Quality Checks and Repairs |
| The hob head has been disassembled and rebuilt |
| Work table drive system checked for problems |
| Hydraulic system drained and cleaned |
| All filters changed |
| Machine was thoroughly cleaned |
| All cycles were tested and are fully functional |
| All worn hoses replaced |
| Sample parts have been cut |
|
|
|
|
|
| The aforementioned description and listing of specifications and accessory equipment is correct and accurate to the best of our knowledge. However, it should not be considered binding in any regard, as we reserve the right to change and/or alter same without prior notice. Consequently the buyer is responsible for confirming same, upon physical inspection and inventory of the machine(s) and all related accessory equipment. |
